Search
Close this search box.

Synchro Converters

SSIU-C Synchro to Serial Converter

The SSIU-C, Synchro to Serial Interface Unit contains up to three, independent, 16-Bit monolithic tracking Synchro/Resolver-To-Digital converters.

Options include 1-Minute, 2-Minute, and 4-Minute accuracy.

The digital outputs are translated and formatted by the embedded CPU and transmitted serially over RS-232 or RS-422 serial interface ports.

All translated synchro data is transmitted with a Header indicating the Synchro channel the data was received from.

Synchro and references signals are transformer isolated. Different Synchro and reference voltage options available.

There is an additional [RS-232] Serial port that is dedicated for firmware updates which can be field up loadable.

Optional output interfaces include ARINC-429 and Mil-Std-1553. Custom interfaces are our specialty.

  • Synchro Converter
  • Synchro to Digital
  • Synchro to NMEA
  • Synchro to Serial
  • Synchro NMEA Protocol
  • Synchro to ARINC
  • Synchro to Ethernet

Operating temperature is -40° to +71°C.

SSIU-T Serial to Synchro Converter

The SSIU-T, Serial to Synchro Interface Unit (SSIU-T) contains up to four, independent, 16-bit, Digital-To-Synchro (D/S) converters. The serial inputs are translated and formatted by the embedded CPU for interfacing to the D/S converters.

There is a dedicated [RS-232] Serial port that is used for firmware updates which can be field uploadable.

Options include different Synchro voltage outputs and Reference input voltages.

Communication input options include ARINC-429 in place of the RS-232/422 port along with ARINC-407, Mil-Std-1553, CAN and custom interfaces.

  • Digital to Synchro
  • Serial to Synchro
  • ARINC to Synchro
  • Ethernet to Synchro

Operating temperature is -40° to +71°C.

SIU Synchro Interface Unit

The SIU, Synchro Interface Unit, has up to ten synchro and one Resolver inputs along with multiple synchro and resolver outputs.

The SIU can operate with either 90v synchro and 115v reference or 11.8v synchro and 26v reference signals.

The SIU operates from a 28VDC which meets MIL-STD-704A-F.

Communication input via RS-422 and has extensive BIT capabilities.

The SIU firmware can be field upgradeable using an RS-232 interface.

Operating temperature is -40° to +71°C.

KIMDU product

Three-Channel Synchro Angle Indicator Unit

The Kimdu AIU-100 is a three-channel Portable Synchro Angle Indicator Unit. The AIU-100 can operate with 90v or 11.8v synchro levels (26v or 115v Reference) which is selectable via a front-panel switch. A 4-line VFD display shows the angle for each of the three synchro channels. In addition, the AIU outputs the data in ASCII over RS-232, RS-422 and USB ports on the back panel.

The AIU-100 monitors the presence of the reference voltage and indicates a Loss of Reference (LOR) via a front-panel indicator lamp. The AIU-100 begins operation when power is applied and continuously updates both the front-panel display and the serial outputs. The unit is powered from 110~240vAC 50/60Hz.

Two-Channel Synchro Angle Generator Unit

The Kimdu AGU-100 is a two-channel portable Synchro Angle Generator Unit. The AGU can be supplied with 1 or 2 output channels The AGU-100 can be ordered with 11.8v or 90v synchro output levels (26v or 115v Reference). The AGU is controlled by a PC-based Kimdu GUI software and interfaced to using either an RS-422 or USB interface.

The AGU-100 monitors the presence of the reference voltage and indicates a Loss of Reference (LOR) via a front-panel indicator lamp. The unit is powered from 110~240vAC 50/60Hz.